There is presently a lot of buzz about some new driver heads that have weights about 25 grams or so lighter than present “conventional” driver heads. These are being promoted to produce more clubhead speed and more distance with the driver. One of the ads I saw for a light driver suggested it would be best to play with a 47.5 inch shaft. This is more than 1.5 inches longer than present driver shafts that you can purchase in stores, and this recommendation is being made so that the club swingweight will be heavy enough so that you can feel the clubhead.
While I am not convinced that lightweight drivers are a good option for most players, here are some basics that you might want to consider when you purchase your next driver – hopefully from a precision clubfitter:
1. The key fitting elements that affect the performance of a driver are the club length, shaft flex and flex profile, club swingweight/MOI – AND how you swing the driver (more on that later).
2. For any player of any level of skill, the maximum performance you will get from a driver in terms of Carry Distance is 2.5 times your swing speed. So if you have a swing speed of 100 mph, the maximum carry you will achieve will be 250 yards. No matter what anyone tells you, with whatever head and shaft combination you use, you will not carry the ball further than this. And this is with perfect contact on the sweet spot of the clubhead.
3. For players of swing speeds of 70 mph or lower, the 2.5 factor is more like 2.2. So for a player with a 70 mph swing speed, the most he will be able to carry his drives is about 154 yards. Again, with best contact on the sweet spot.
4. Contact with the sweet spot of the driver is king! So if you can find a club length, shaft, and swingweight/MOI combination that promotes the most consistent contact on the sweet spot, you will have the best opportunity to maximize carry distance.
5. For slower swing speeds, drivers with higher lofts can help to provide maximum carry distance.
6. Now beyond carry distance to total distance – roll out of the drive is influenced by ball speed, launch angle, and ball spin. The shaft can have some influence on ball spin, but most likely your technique will have a major influence on your ball spin. The ball you play with can also have an influence.
7. If you decide to have a fitting done for your driver, a key parameter that is measured as part of the fitting is the Power Transfer Ratio – PTR – which is the ratio of the ball speed divided by your swing speed. For drivers option PTR is about 1.48, and if your measured PTR is much below this you are not achieving optimum conditions with the driver you are testing.
8. Finally, of you do decide to hit some very long drivers with lengths in the range of 47-1/2 inches, if at all possible do some test with impact labels. If you see you are consistently hitting this driver in the center of the face great. But if not most likely this club is too long for you.
Happy driving!
Tony